Filterless Humidifier

The most important part of a humidifier is the humidifier filter. The problem is that the filter gets clogged and needs replacement which costs money and time. A filterless humidifier solves this problem and offers the convenience of never having the need to replace a filter.

In a typical humidifier filter, particles in the air and pollutants are trapped when passing through a filter or wick soaked in water. The air is carries the moisture from the wet filters and evaporates as it leaves the humidifier unit. The most common designs use this sort of evaporating humidifier filter.

In a filterless humidifier the particles are charged with electrostatic energy and passed along a grid of that carries an opposite charge. This attracts the now charged particles to stick to the grid releasing a clean breeze of air.

To clean the grid is simple and the only effort required is to pull out the grid and wipe it clean with a cloth. A filter free humidifier saves the owner from spending money on new replacement filters.

Despite the convenience and economical benefits of a having a humidifier with no filter, there are some possible health concerns resulting from changing the electric composition in the air. While the precise effects are uncertain, the known threat is in high concentration of the air. This risk can be minimized by using a unit that is designed for the size of the room where it is to be utilized. The exact room dimensions will be specified on the box and in the owner’s manual. Also, look for a unit that comes with adjustable settings to ensure the room is not over humidified.

A humidifier is used to improve the air quality and combat problems that arise from extremely dry conditions. Health problems such as irritation, itchy skin, respiratory problems and nose bleeds can be caused by dry air which is mitigated by a humidifier. The recommended setting is between 30 to 50% humidity which is why having a setting feature on the unit is important.

A filterless humidifier usually runs very quiet and makes it a good candidate for night use. The elimination of the need for consumables like the filter saves in the long run but expect to pay a little more initially since the unit will cost more than a comparable traditional humidifier. The savings from not needing a filter will pay itself off in a year or two.

How to Replace a Humidifier Filter

A humidifier filter is used to capture the particles and pollutants that float around in the air. It is the dirtiest part of a humidifier and it is critical that the filter is replaced on a timely basis. The frequency of replacement depends on the use of the humidifier as well as the time, whichever is first. If there is visible build up of dust and dirt in the filter then it is definitely time for a replacement. After a year, it is important to replace the filter even when nothing is visible because of microscopic debris that could be trapped in the filters. The most common pollutants are mold and bacteria that can’t be seen with the naked eye.

When replacing a humidifier filter it is important that you use an exact match and the filter fits perfectly for optimal filtering effectiveness. Knowing the specifics of the humidifier unit, such as the hardness of the water that goes into it and the frequency of use will help determine how often the filter should be replaced.

The first step is to turn off and unplug the unit. When opening any electrical appliance it is common sense to unplug the unit to avoid any risk of problems like electrocution.

Once the unit is off and unplugged proceed to remove the water tank or reservoir and clean that part of the unit. Disinfect the water tank to keep it clear of mold and bacteria that could result from sitting water. Empty the tank if necessary and refill it with cool water and one tablespoon of bleach. Allow it to sit for 20 minutes then rinse and clean thoroughly.

With the water tank or reservoir out of the way, remove the motor housing that covers the top of the humidifier. Feel free to vacuum or wipe away any dust off the surfaces both inside and outside the housing. For a more detailed clean contact a professional or the manufacturers support, do not attempt to disassemble the unit any further or risk voiding the warranty.

Now that the housing is removed, the filter should lift right out. Depending on the model, some filters can be washed and reused. Refer to the manufacturer supplied owner’s manual for more details. If it is a reusable filter you might want to vacuum a majority of the dust first or it could get very messy. Clean the filter in water and do not squeeze or wring the filter because the force could cause a tear. It is usually more sanitary to replace with a new filter since they usually are not too expensive. It is the surest way of having a clean filter.

For further cleaning pour a cup of undiluted white vinegar into the base of the unit and let it sit for 20 minutes. Use the bleach-water mix from the water tank to disinfect and rinse and clean thoroughly before putting everything back together. Using bleach-water is often is good cheap solution for cleaning just about any household appliances. Check the user guide for instructions before proceeding.

Types of Humidifiers and Furnace Humidifier Filter

Evaporative Humidifier Filter

The most common humidifier models are evaporative and use evaporative humidifier filters. The filter is usually paper, cloth or foam that is saturated in water while a fan blows air through the filter or wick which forces moisture to evaporate into the air. This design is self regulating since dry air evaporates the water faster while higher humidity makes it harder for the water to evaporate. This is convenient because user control is not necessary and the level of humidity is self regulated.

The filter is used to trap particles and pollutants from the air so it works as an air filter as well as humidifier. Evaporative humidifiers come in all sizes from tabletop units to large house units that can work in conjunction with the home’s heating and cooling system.

Furnace Humidifier Filter

A furnace humidifier is any unit that is connected to the home furnace system and works with the heating and cooling system of the entire house. It uses the home’s water system to humidify the entire house and costs a little more than most units simply because of the size and its integration with the other systems in the house. A furnace humidifier filter uses the same evaporative design in which the air passes over a wet filter where moisture enters the air and particles are trapped. Aprilaire is the best brand for a furnace humidifier and is something that can be done as a home improvement project that will only take a day’s work.

Cool Mist Humidifier Filter

The cool mist humidifier is very common in small units and works by passing water through a wick or filter. It differentiates itself from other humidifiers in that there is no heating involved, hence the name cool mist. A vapor is pushed into the air with a fan and is considered a very safe humidifying technique for infants and small children.

In some climate specific areas where heating is not desired cool mist humidifiers are perfect. Since no energy is used for heating there is significant energy savings. Also, the droplets of water are larger than typical, cool mist humidifier filters don’t run the risk of white dust caused by the minerals in the water. While white dust is not dangerous it can be annoying when it settles on furniture and other things around the house.

Ultrasonic Humidifier

The key benefit of an ultrasonic humidifier is the energy savings. It also offers a very quiet humidification system because it uses a high-frequency vibration which releases micro-sized mist to moisten the air. There is very little maintenance on an ultrasonic humidifier which is where the cost savings come in. Humidifirst is the company that leads the pack in ultrasonic humidifier technology and its units can be used to produce cool or warm mist depending on the user’s desires. A setting control also allows for target humidity levels to be set and the unit stops when the target is reached. This is very useful to protect from over humidifying.